GPC and G77 (was without subject)-;

Wed, 21 May 1997 01:25:39 +0200 (MET DST)

DENISYUK VEDIM A wrote:
> ---------- Forwarded message ----------
> Date: Mon, 19 May 1997 15:13:18 +0200 (MET DST)
> From: fB 
> To: Vadim Denisyuk 
> Subject: GPC compiled, but it does not work.
> [...]
> =========================================================================
> % ./gpc -c test/standard_pascal/hello.pas
> gpc: test/standard_pascal/hello.pas: linker input file unused since
> linking not done
> =========================================================================
> So I probably messed up the command parser somewhere (see note).

You are using the wrong `gpc' driver program: It does not recognize
Pascal source files and thinks they are for the linker.

To fix this, make sure that the correct `gcc.o' is linked to produce
the `gpc' driver program.  It's the same problem as with `stor-layout.o'
etc., and the solution is the same, too (see my previous mail).

Good luck,

    Peter

  Dipl.-Phys. Peter Gerwinski, Essen, Germany, free physicist and programmer
peter.gerwinski@uni-essen.de - http://home.pages.de/~peter.gerwinski/ [970201]
 maintainer GNU Pascal [970510] - http://home.pages.de/~gnu-pascal/ [970125]

Peter Gerwinski (peter@agnes.dida.physik.uni-essen.de)